Ametek Dycor CG1000-RTP, User Manual, Page: 53 / 96

Calibration
|
5-1
CALIBRATE KEY
Overview
Calibrate Key Function/Options
initiate cal start a calibration
initiate verify start a verify
cal/verify data view previously collected calibration or verify data
cal gas values Enter calibration gas values to match known values of
calibration gas cylinders
Configure Verify Enter verify gas value
Enter acceptable verify range
set clock set the current date and time
set calibration recovery times
All oxygen alarms are disabled during calibrations or verifications,
as well as during the recovery time after a calibration or verification.
Use the
Analog Range key to set whether analog outputs should fol-
low the calibration reading or hold at the last process reading.
NOTE
