PN 9000-165-VE, Rev P
Inject Gas
Press the Left or Right arrows to locate the
Inject Gas
menu and press
ENTER/
MENU
. Use this menu to test the flow of gas to the analyzer.
1. Use the arrows to select the gas to inject and press
ENTER/MENU
. An “X”
appears in the check box of the option selected.
2. Select the
START
button and press
ENTER/MENU
to inject the gas.
Figure 3-4.
Inject Zero Gas screen
(Diagnostics Mode).
Pressing
ENTER/MENU
to start the test will turn on the
Diagnostics Mode
.
3. Press
ENTER/MENU
to end the test and return to the
Inject Gas
screen. It
will also turn
Diagnostics Mode
Off.
4. Press
CANCEL
to exit from the menu.
3-6 | Thermox
®
AMEVision Display User Interface
Summary of Contents for AMEVision
