PN 9000-165-VE, Rev P
Configuration Menu
Analog Output
Define parameters that control analog current outputs.
Sensor Configuration
Define the type of sensor you are using and the gases
to be measured.
Alarm Configuration
Define parameters that control the alarm relays.
Communications
Define AMEVision communication parameters. Select
TC/IP or modbus function.
Process Pressure
Select a positive or negative process pressure. Enter
process pressure value.
System Time
Set system and display time in 24-hour format.
Passcode Configuration
Create a system password to limit control unit access.
Sensor Name Configuration
Name sensor and connected sensors in a multiple-
analyzer configuration.
Selecting Menu Options
Press
ENTER/MENU
on the AMEVision keypad.
Setting Menu Options
To accept changes you have made press
ENTER/MENU
.
Exiting Menu Options
Press
CANCEL
on the AMEVision keypad.
Figure 2-2.
Sensor Configuration menu.
2-4 | Thermox
®
AMEVision Display User Interface
Summary of Contents for AMEVision
