Controller/Interface
|
2-3
PN 9000-165-VE, Rev P
When all gases are selected in the
Sensor Configuration
menu, the
HOME
screen does not display the
Trend
plot.
When there is an alarm condition, alarm information is displayed on
the
Status Bar
which turns RED for FAIL and YELLOW for WARNINGS.
On multi-analyzer systems, the Left and Right arrows navigate
through the connected analyzers.
The sensor you have selected on the
HOME
screen is the only sensor
whose functions and process will display on the AMEVision menus. To
configure or view additional sensor setups, you must first select that
analyzer on the
HOME
screen using the Left/Right arrows.
Summary of Contents for AMEVision
