Safety
SPECTRO ARCOS FHX3X — 08.02.2022
— 7
Warning! Toxic and corrosive substances!
Warning of non-ionizing radiation!
Notice!
Warns of activities or conditions that may adversely affect the function of the
instrument.
Information
Displays information that is important for the correct and safe use of the
instrument.
2.2 User
information
Compliance with all safety instructions is mandatory. It’s for your own safety.
Compliance with the signs at the instrument’s place of installation is
mandatory.
The labels on the instrument must be observed.
Only properly trained personnel shall be permitted to operate the instrument.
While in its transport packaging, the instrument may only be transported by
expert organizations or by specifically trained personnel.
The instrument is front-heavy and its center of gravity is located in the optical
system (front left side of the instrument).
Only service personnel authorized by the manufacturer are permitted to
unpack, install, set up, and connect the instrument.
The instrument is intended for use indoors and in dry ambient conditions.
If applicable, personal protective equipment (protective gloves, goggles, etc.)
must be worn.
Only carry out operator maintenance work described in Chapter 7 of the
operating manual. Any further maintenance work (e.g. technical maintenance)
or repairs must only be performed by service personnel authorized by the
manufacturer.
Compliance with all safety instructions and accident prevention regulations is
mandatory during operation and while performing maintenance tasks.
Check the protective measures after every technical maintenance or repair
activity. The checking procedure is carried out in accordance with DGUV V3
(German Social Accident Insurance) or an equivalent national regulation.
Summary of Contents for 76004567
Page 2: ......
