Ametek 3050-AMS, User Manual

Page: 85 / 96

PC Interface | A-1

NOTE
PC INTERFACE
AMETEK UHP Moisture Configurator Software
The Configurator software provides a graphical user interface to set up
parameters for either a single analyzer or multiple analyzers.
Though you can set and view parameters for multiple analyzers using the
Configurator software, you can only work with one analyzer at any time.
Configurator Software Installation
1. Insert the configurator software CD into CD ROM drive.
2. The installation program should begin to run immediately. If it does not
start automatically, click RUN ... from the Windows Start menu. Type the
drive letter, followed by a colon ( : ) and a backslash (\) and the word
“setup.exe” (d:\setup.exe) and click
OK to start the installation program.
3. Follow the instructions on the subsequent screens to complete the in-
stallation. When you get to the Setup Complete screen, click Finish to
complete the installation. The default location for the 3050-AMSS software
is in the
AMETEK, Inc. folder.
Turn off all power saving modes.

NOTE