Ametek 3050-AMS, User Manual

Page: 53 / 96

User Interface
|
4-11
Production Codes
Use this function to enter the production codes for the reference dryer.
Reference Dryer
The dryer production code is required for proper operation of the ana-
lyzer. This number contains the dryer capacity value, which is used to
estimate the life expectancy of the device.
Use caution, as entering a “new” value informs the analyzer that a
new dryer has been installed in the reference leg of the analyzer. The
remaining dryer capacity is reset when a new number is entered.
Moisture Units
Select Units

NOTE

NOTE
The units for the moisture readings can be selected from a list. Pressing
Enter at the “Select Units” prompt displays the list. (If a dew/frost point is
selected, you must enter a value for the process pressure in units of kPa.
If you change the moisture units, remember to make the necessary
changes to the Alarm and Analog Range settings.
Production
Codes
Reference
Dryer
Config
Moisture Unit
Select Unit
PPMV
Centigrade
Fahrenheit
Config
Pressure (KPa)*
Pressure (KPa)*