Ametek Land Landmark Graphic AE, User Manual

Page: 5 / 84

Contents
1 Introduction 1
1.1 About this Guide 1
1.2 About the Processor 2
1.3 Specifications 3
1.4 Unpacking the Processor 5
2 Installing the Processor 6
2.1 Installing the Processor Into a Panel 6
2.2 Electrical Connections 9
2.2.1 Alarm output connection schedule 11
2.2.2 CMD (Command) input connection schedule 11
2.2.3 Output (Retransmission output) connection schedule 13
2.2.4 Thermometer input/output connection schedule 16
2.2.5 Serial communications and maths function options 17
2.3 System 4 and ABT/S Thermometer Cable Connector Assembly 18
2.4 AET/AQT Thermometer Cable Connector Assembly 19
2.5 a.c. Power Input Plug 21
3 Using the Processor 22
3.1 Getting Started (accessing the menu system) 25
3.2 About the Menu System 29
3.3 Configuring Items in the Menu System 31
3.4 Configuring Constants for AET/AQT Thermometers 33
3.4.1 Constant ranges for AET/AQT 35
3.4.2 Explanation of Constants 35
3.5 Configuring for ABT/S Thermometers 37
3.5.1 Guidance on Snapshot Setup for ABT/S 39
3.5.2 New parameter limits and defaults 41
3.5.3 Serial parameters 41
3.6 Using the ‘Quick’ Keys 43
3.6.1 Emissivity Quick key 43
3.6.2 Alarm Quick key 44
3.6.3 Display Quick key 45
4 Time Functioning Processing 46
4.1 Peak Picker (not available on AET/AQT channels) 46
4.2 Track and Hold 48
4.3 Averager 49
4.4 Valley Picker (not available on AET/AQT channels) 50
4.5 Quench Rate Operation (Requires AET/AQT) 52
4.5.1 Introduction 52
4.5.2 Quench Rate 53
4.5.3 New parameters 54
4.5.4 Pre-Configuration Notes 55
4.5.5 Configuration of Automatic Mode (Quench A) 56
4.5.6 Quench Rate Manual Mode (Quench M) 58
4.5.7 System Response 60
4.5.8 Application Examples 61
5 Language Selection 67
6 Maintenance 69
Appendix A - Display Modes 71