Ametek Land Landmark Graphic AE, User Manual, Page: 25 / 84

Page 19
User Guide Signal Processor
LMG AE
2.4 AET/AQT Thermometer Cable Connector Assembly
The cable connectors for the rear panel of the processor are included in the
processor package. Each cable connector must be correctly wired with the
appropriate cable before the processor is used (refer to Section 2.2 for the
cable schedules).
To wire up the connector.
1) Make a note of the connector’s orientation in the rear panel of the processor.
2) Wire up the connector, remembering the correct orientation of the plug, in
accordance with the relevant cable schedule (see Section 2.2). Refer to Fig. 14a.
The connector is now ready for use.
Fig. 14 - Correct System 4 and ABT/S Thermometer cable
connector wiring arrangement
234014
NOTE
Keep wire length as short as possible.
Ensure cable outer insulation
is held in clamp bar/cable tie
Clamp bar
Keep wire length as
short as possible
1
7