![AmeriWater 000-HS120 Operation & Maintenance Manual Download Page 31](http://html1.mh-extra.com/html/ameriwater/000-hs120/000-hs120_operation-and-maintenance-manual_3043934031.webp)
29
098-0007 Rev B
7
CONTROLLER
7.1
User Interface
The Centurion Plus Heat Disinfection Device is controlled via the touch screen located on the top of the
unit. The image below shows a representation of the home screen display. To select an action, touch the
screen on the appropriate button one time with your finger.
NOTE:
Do Not use sharp or pointed instruments such as pens, pencils, etc. to operate the screen as this
may damage the sensitive surface of the display. Always operate the screen using your fingertips.
Do not press more than one button at a time.
Start
o
Press the button one time to begin a disinfection cycle. The User will be prompted to
confirm that they want to perform a disinfection prior to the cycle starting.
Schedule
o
Pressing the schedule button will prompt the user to enter a password to access the
schedule menu. The passwords can be found in Section 7.2. Entering the appropriate
password will allow the user to access the disinfection schedule for the device. The
system settings will be accessible via a level 2 password from the schedule menu.
Function Keys
o
Nonfunctional physical buttons located below touchscreen. Pushing these buttons will not
provide any results for the user.
Escape Key
o
Pressing the escape key while on a “System Screen” (i.e. time & date setting, keyboard,
etc.) will return the user to the previous screen. An on screen escape button will also be
present on these screens.
Status Border
o
The border will change from blue to red when an alarm condition is present.
Disinfection Status Message
o
The disinfection status message will inform the user of the status of the last disinfection.
The message will say either “Last Disinfection Failed” or “Last Completed Heat
Disinfection” and will provide a time and date stamp for the last disinfection. The
Disinfection
start button
Schedule
Menu Access
Function Keys
Escape Key
Status border
Last Completed Heat Disinfection:
Disinfection
Status Message
Summary of Contents for 000-HS120
