LCD Display
Speakerphone icon (displayed when the Speakerphone is ON)
Key lock icon (displayed when the user locks the keypad)
Mute icon (displayed when the Handset microphone is Muted)
Low battery icon (on only if the battery voltage is low)
Off Hook icon (displayed when the Handset is on an external or intercom call)
NEW icon (displayed when the new Caller ID records are available)
Ringer OFF icon (displayed when the user turns the ringer off)
In Service icon (displayed when the Handset is ‘in range’ of the Base)
Getting Started
Install and Charge the Battery Pack
1
Open the battery compartment by sliding the cover down.
2
Plug the Battery Pack connector into the Handset socket, then place the battery pack and wires in the
compartment.
3
Slide the battery cover back into place.
4
Plug the telephone cord and DC power cord into the corresponding jacks on the bottom of the Base.
5
Connect the power supply to a live outlet. Make sure the outlet is not controlled by a switch.
6
Leave the Handset in the Base for 10 hours so that the battery pack is fully charged.
8