American Telecom E30001B Series, User Manual, Page: 14 / 28

The menu is accessed by pressing the
PROG//OK
key. An overview of the menu structure is shown in Figure 1.1.
Tone
Low battery
Pulse
No coverage
Key tone
English
Francais
Espanol
Reset
Dial mode
Flash time
CID prefix
VMWI
Reset Language
Contrast
Handset name
T ones
Change PIN
Ring Volume
Setup HS Setup BS
Ring melody
Auto talk
Figure 1.1 Menu structure.
Call Log (Caller ID)
Caller ID logs all incoming calls with a valid Caller ID, provided the phone numbers are stored in the call log.
Name and time/date information is also stored in the call log if your service provider sends it.
The number of unanswered calls (
NEW
), if any, is indicated:
Missed Calls
The new call indicator is removed when the call log has been reviewed.
The call log is entered via the menu, as described below or by pressing the
▼ key in the idle mode. The Handset
jumps directly to the call log.
The call log is reviewed as follows:
1. Press
Caller ID
to enter the menu.
2. The caller’s name will be shown in the second line of the display, and the number in the third line. If the time
and date information are contained in the Caller ID and there are three lines in the display, it will be shown in
the top line.
12/10 7:48
PM
NEW
SOMEBODY
987-654-3210
The name contained in the received Caller ID will be replaced by the name in the Phone Book, if the Phone Book
contains a matching number; i.e. the Phone Book name takes precedence.
3. Scroll through the call log entries using the
▼ and ▲ keys.
11/27 11:02
AM
ANOTHERPERSON
012-345-6789
The following actions are possible from the call log:
•
Dial
the caller displayed by pressing the
Talk/Spk
key.
•
Press the
PROG//OK
key and, using the ▼ and ▲ keys, you can select the following actions.
o
Select
the number and edit it as pre-dialing. Press the
Talk/Spk
key when you have finished editing
and you are ready to dial.
o Save number
: Save the Caller ID information displayed into the Phone Book by pressing the
PROG//OK
key. Before the name and number is transferred to the Phone Book, you can edit the
name.
Note:
Caller ID information, without a valid phone number cannot be transferred to Phone Book memory.
•

Delete?:
Delete the caller displayed by pressing the
PROG//OK
key. After pressing the
PROG//OK
key,
you will be asked to ‘
Confirm?
’; you can either accept deletion by pressing
PROG//OK
or cancel it by
pressing
Clear
.
14