American Telecom E30001B Series, User Manual, Page: 18 / 28

2) Press the
PROG/OK
key twice to select
Add new
to add new number
Enter number
3) Enter the number (up to 24 digits).
4) Press
PROG
.
Enter name
5) Enter the desired name (up to 15 characters). A name has to be entered; otherwise the number cannot be saved.
Enter name
6) Press
the
PROG//OK
key. Your new entry has been stored. “Saved” will display, and the screen returns to:
>SOMEBODY
---------------
Press
OFF
to return to the idle screen.
If the Phone Book is full when the user tries to store a new number in it, ‘
Memory full
’ is displayed and an error
tone is emitted.
Memory full
Volume
During your conversation, the volume can be adjusted with the ▲ / ▼ keys. The level will be represented by the
number of bars displayed on the screen. The display returns to normal in-call after 3 seconds.
Ring Volume
The ring volume is adjusted by the following key sequence:
1) Press
the
PROG /OK
key twice to select
Setup HS
> Ring melody
Ring volume
2) Press
the ▼ key once and Press
PROG/OK
to enter the ring volume sub-menu.
„„„
3) Use
the ▼ / ▲ keys. The current ring tone will be played once at the selected new volume.
„„
4) Press
the
PROG//OK
key to confirm the setting. The display returns to:
>RING VOLUME
Tones
Ringing is switched off by holding the * key and there is an alert tone to indicate that the ringer is OFF / ON.
Ring Pattern
The ring pattern of an incoming call is changed by the following key sequence:
1) Press
the
PROG/OK
key twice to select
Setup HS.
> Ring melody
Ring volume
2) Press
PROG/OK
once more.
3) Use the ▼ / ▲ keys. The selected ring pattern is played for you.
>Melody 1
Melody 2
4) Press
PROG/OK
to confirm the setting. The display will show:
Saved
18