4. Message waiting-voice message waiting indication.
5. Missed calls-Caller ID missed call.
6. Charging-Handset on cradle for charging.
Registering Your Handsets (Adding Handsets to Your
System)
Further handsets can be registered with the Base station.
1. Press
the
PROG/OK
key.
2. Press # 2 4 5 0 # keys in sequence.
3. Press the Down key repeatedly to select the REGISTRATION submenu.
4. Press
the
PROG/OK
key.
5. Press
the
PROG/OK
key again, Press and hold down the PAGE key on the Base station for 10 seconds, then
enter the PIN when requested. (Default setting=0000).
6. Press
the
PROG/OK
key.
7. If the registration succeeds, the display shows “Successful” for 2 seconds.
8. If the registration fails after 60 seconds, the display shows “No Base” for 2 seconds.
Note: After the connection has been established, the name and number of the handset (The next available number,
if less than 4 handsets are already registered) appears in the display.
Note: An unregistered handset will show “
Not Reg
” to indicate that this handset needs registration before use.
De-registering Your Handsets (Removing Handsets from
Your System)
Any handset can be removed from the Base station.
1. Press the
PROG/OK
key.
2. Press # 2 4 5 0 # keys in sequence.
3. Press the
▼
key repeatedly to select the
REGISTRATION
submenu.
4. Press
the
PROG/OK
key.
5. Press
the
▼
key once to
Remove handset.
6. Press
the
PROG/OK
key, then enter the PIN when requested. (Default setting=0000)
7. Press
the
PROG/OK
key
8. Press
▲
or
▼
key to select a handset
9. Press the
PROG/OK
key twice to confirm, if the handset being used was selected, the
display shows “
Not Reg
” or else will return to the upper menu and the corresponding
handset display shows “
Not Reg
”.
25