American Telecom E30001B Series, User Manual, Page: 23 / 28

1) Press the
PROG/OK
key once and then press the ▼ key once to select
Setup BS
.
> Setup BS
Date/Time
2) Press
the
PROG/OK
key once to select
Setup BS
.
3) Press the ▼ key once and then the
PROG/OK
key once to select Dial Mode.
4) The current Dial Mode is shown with an arrow. Use the ▲ or ▼ key to select
Tone
or
Pulse
dialing.
5) Press the
PROG/OK
key to confirm the setting. The phone will return to the previous menu.
Base Flash Timing
Depending on your Telephone network, you can select different Flash timing:
1) Press
the
PROG/OK
once and then press the ▼ key once to
Setup BS.
> Setup BS
Date/Time
2) Press
the
PROG/OK
key once to select
Setup BS
.
3) Press the ▼ key twice and then the
PROG/OK
key once to select Flash Timing.
4) The current Flash Timing is shown with an arrow. Use the ▲ or ▼ key to select
100ms, 120ms, 270ms,
300ms, 370ms, 600ms
or
800ms
.
5) Press the
PROG/OK
key to confirm the settings. The phone will return to the previous menu.
Base CID Prefix
You can set to add a prefix digit “1” to Call log by following procedures;
1) Press
the
PROG/OK
key once and then press the ▼ key once to
Setup BS.
> Setup BS
Date/Time
2) Press
the
PROG/OK
key once to select Setup BS.
3) Press the ▼ key three times and then the
PROG/OK
key once to select Caller ID prefix.
4) The current Caller ID prefix is shown with an arrow. Use the ▲ or ▼ key to select On or Off.
5) Press the
PROG/OK
to confirm the setting. The phone will return to the previous menu.
Base Message Waiting LED
You can turn off the Message Waiting LED by following the procedures:
1) Press
the
PROG/OK
key once and then press the ▼ key once to select
Setup BS.
> Setup BS
Date/Time
2) Press
the
PROG/OK
key once to select
Setup BS
.
3) Press the ▼ key four times and the
PROG/OK
key once to select VMWI.
VMWI off
4) Press
the
PROG/OK
key to confirm.
Resetting the Base
You can reset the base through the following procedures:
1) Press
the
PROG/OK
key once and then press the ▼ key once to
Setup BS.
> Setup BS
Date/Time
2) Press
the
PROG/OK
key once to select
Setup BS
.
3) Press the ▼ key five times and the
PROG/OK
key once to select Reset.
Enter PIN
4) Enter the PIN Code and Press the
PROG/OK
key.
23