manualshive.com logo in svg

American Megatrends MegaPro, User Manual, Page: 3 / 85

Share
Download
American Megatrends MegaPro User Manual Download Page 3

Preface

iii

Preface

To the OEM

Thank you for purchasing the high performance American Megatrends
MegaPro Dual Pentium Pro PCI ISA motherboard. This product is a
state of the art motherboard that includes the famous AMIBIOS. It is
assumed that you have also licensed the rights to use the American
Megatrends documentation for the American Megatrends MegaPro
motherboard.

This manual was written for the OEM to assist in the proper installation
and operation of this motherboard. This manual describes the
specifications and features of the MegaPro PCI motherboard. It explains
how to assemble a system based on the MegaPro PCI motherboard and
how to use the AMIBIOS that is specifically designed for this
motherboard.

This manual is not meant to be read by the computer owner who
purchases a computer with this motherboard. It is assumed that you, the
computer manufacturer, will use this manual as a sourcebook of
information, and that parts of this manual will be included in the
computer owner's manual.

Technical Support

If an American Megatrends motherboard fails to operate as described or
you are in doubt about a configuration option, please call technical
support at 770–246–8645.

Summary of Contents for MegaPro






















































































Reviews:

No comments