Chapter 2 WINBIOS Setup
61
Power Management Setup,
Continued
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ12
IRQ15
When set to Monitor, these options enable event monitoring on the
specified hardware interrupt request line. If set to Monitor and the
computer is in a power saving state, AMIBIOS watches for activity on
the specified IRQ line. The computer enters the Full On state if any
activity occurs. AMIBIOS reloads the Standby and Suspend timeout
timers if activity occurs on the specified IRQ line. The settings for each
of these options are Monitor or Ignore. The Optimal and Fail–Safe
default settings are Disabled for all the above options except IRQ3,
IRQ4, IRQ7, IRQ12, IRQ14, and IRQ15. The Optimal default setting for
these options is Monitor.
