American Landmaster 36V 200 Series, Service Manual

Page: 22 / 31

Page 19
200 Series 36V 15312
Throttle Switch

The throttle switch is an ON/OFF switch.

Use “Ω” setting on the meter.

Remove the throttle harness connectors.

Place one probe on each spade terminal on the Switch.

With the button pushed in (throttle fully returned) the meter should say “OL”.

With the button extended (throttle pressed), there should be a value shown close to
Zero Ohms (0Ω).

If this does not happen, replace the switch.
Throttle Position
Sensor Probe Placement
<160 Ω with
throttle returned
>4.3 KΩ with
throttle depressed