American Dynamics Multivision Quest TMV910Q, User Manual

Page: 48 / 80

User’s Guide
40 Advanced Setup Using On-Screen Menus
Alarm Spot Display Select “YES” for this item to cause the Call Monitor to
switch to the corresponding camera when an alarm event is
triggered. If “NO” is selected, the Call Monitor will
continue to follow the Call Monitor switching sequence in
Configuration Table 1 . (See page 28)
Response Duration This item allows you to decide how long the buzzer and
Alarm Out relay will function after an alarm is triggered.
The value can range from 1 to 9999 seconds.
Any Key To Stop
If this setting is enabled (“YES”), the operator will be able to
turn off the buzzer and alarm relay responses following an
alarm by pressing any key.
MENU ITEM DESCRIPTION