American Dynamics Multivision Quest TMV910Q, User Manual

Page: 33 / 80

Triplex Digital Video Multiplexer
Advanced Setup Using On-Screen Menus 25
To cancel all the changes, move the cursor to 9 Exit/ Without Update and press Enter .
To save the changes, move the cursor to 8 Exit/Update and press Enter .
Date Display Mode
There are three types of date/time OSD (on-screen display): Y/M/D, M/D/Y and
D/M/Y. Move the cursor to
2 Date Display Mode , and use the RIGHT/LEFT keys to
change the option.
Date/Time Display
The date/time OSD (on-screen display) can be shown in one or two rows, move the
cursor to
3 Date/Time Display , and use the RIGHT/LEFT keys to change the option.
Date/Time Position
In the OSD/Timer Set Up Menu , move the cursor to 4 Date/Time Position and press
Enter . The menu will disappear, and only the date/time display will be left on the
Main Monitor.
Use the Direction keys to adjust the position of the date/time display. Press Esc to
exit when finished.
RS-485 Time Calibration
In the OSD/Timer Set Up Menu, move the cursor to 5 RS-485 Time Calibration , and
press
Enter
. Other multiplexers which are connected by RS-485 will be calibrated to
the same date/time as the triplex multiplexer.
Spot Monitor Dwell
Unless there is an alarm or the user selects a specific monitor, the spot monitor (Call
Monitor) shows full screen video of all installed cameras in sequence. This item
allows you to set the Dwell Time between switching. The timer value can range from 1
to 255 seconds.
Text Color
This item allows you to select one of 16 different colors for the on-screen display.
Display Type
To improve OSD (on-screen display) visibility, the user can select from six different
combinations of font color and background color.