American Dynamics MegaPower 48 Plus Installation And Operation Manual Download Page 5 | Manualshive

Page: 5 / 44

background image

5

Installation and Operation Manual

Easy48 for the MegaPower 48+

This manual provides information about setting up the MegaPower 48+ video routing system through the use of the
Easy48 software.

Features of the software include the following:

•

Easy to use Windows-style user interface

•

Access for up to 64 system users

•

System security via passcode protection, priority level definition and system partitioning

•

Supports multi matrix systems, with mode and IP configuration for a primary matrix and up to six secondary matrices

•

Switching capability for up to 288 cameras, 16 full cross point switched monitor outputs, 64 salvos and 64 tours

•

Automatic update of configuration screens depending on the selected multi matrix mode

•

Upload and download functionality

•

Alarm call-up and clearance for RS232, dome, patch panel and video loss alarm inputs

•

Text message paging on alarm (up to 250 user-definable messages)

•

Up to 35 event timers for system tours and alarm call-ups scheduled for specific times of days and specific days of
the week.

This manual is written for people who will perform the set up and editing of the MegaPower 48+ system software
parameters, and for people who will be responsible for administration and maintenance of the system.

Compatibility

The Easy48 configuration software is suitable for use with the MegaPower 48+ only. Use the S

3

system setup software

to configure the MegaPower 48, AD168 and AD1024 matrix switcher/controller systems. The MegaPower 48 can be
ugraded to a MegaPower 48+ by purchasing a software upgrade from your supplier.

Related Documents

Other sources provide supplemental information about MegaPower 48+ and serve to enhance your understanding of
the system and its applications.

•

MegaPower 48+ Installation Manual

•

MegaPower 48+ System Programming and Operating Manual

•

MegaPower 48+ Wall Mounting Instructions

•

MegaPower 48+ VR48RKIT Rack Mounting Assembly Instructions

If you require additional copies of the Easy 48 for the MegaPower 48+ Installation and Operating Manual, or any other
support documentation, contact your American Dynamics sales representative.

Support Services

A variety of support services are available to help you to obtain optimal performance from your MegaPower 48+ system.
If you have a question about system operation and you cannot find the answer in this document, please contact
American Dynamics Video Products Division or visit the American Dynamics website at

www.americandynamics.net

.

«
...
3
4
5
6
7
...
»

Summary of Contents for MegaPower 48 Plus













































Reviews:

No comments

Related manuals for MegaPower 48 Plus

Brand: Movie Vision Pages: 2

Brand: SMC Networks Pages: 2

Brand: Omega Engineering Pages: 8

EOC Master CD7944N

Brand: Data Pages: 18

Brand: SMART Pages: 46

Brand: Wavetronix Pages: 3

Brand: Moxa Technologies Pages: 7

Brand: TRENDnet Pages: 2

Brand: Datavideo Pages: 64

Brand: Jerguson Pages: 16

Brand: Sunix Pages: 55

Brand: SLV Pages: 22

Brand: Konig Pages: 52

Brand: Nortel Pages: 46

Brand: Black Box Pages: 21

Sierra Video 3264V5Sxl

Brand: Kramer Pages: 1

Brand: StarTech.com Pages: 2

Brand: Grizzly Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands