”Saved fail”, it means the chase store failed.
6) Repeat Steps 3-5 until all desired scenes have been entered.
Copy All Scenes of A Bank to a Chase -
1) Enter program mode (See Enabling Program Mode).
2) Press the Chase button to select the chase you wish to program.
3) Press the Bank Up/Down button to choose the desired Bank that
has scenes stored inside it. In each Bank, the LED will glow green if
the scene button contains data.
4) Press the ADD button. If the LCD displays ”Saved”, it means
the chase scene has been successfully stored. If the LCD displays
”Saved fail”, it means the chase store failed.
5) Repeat Steps 3-4 until all desired scenes have been entered.
Add a Step -
1) Enter program mode (See Enabling Program Mode).
2) Press the Chase button to select the desired chase you wish to
add a Step to. The LCD will display how many Steps have already
been stored in the chase.
3) Press the Tap Sync button.
4) Press the Bank Up/Down button to scroll to the Step which you
wish to insert the Step after. You can read the Steps in the LCD Dis-
play.
5) Press the ADD button.
6) Press the Bank Up/Down button to choose the desired Bank that
has scenes stored inside it. In each Bank, the LED will glow green if
the scene button contains data.
7) Press the desired Scene button to select the scene you wish to
add.
8) Press the ADD button. If the LCD displays ”Saved”, it means
the chase scene has been successfully stored. If the LCD displays
”Saved fail”, it means the chase store failed.
EXAMPLE: Add scene 2 of Bank 3 between Steps 4 & 5 of chase 5.
1) Enter program mode (See Enabling Program Mode).
2) Press the Chase 5 button.The LCD will display how many Steps
have already stored in chase 5.
3) Press the Tap Sync button.
4) Press the Bank Up/Down button to select Step 4. You can read the
Step in the LCD Display.
5) Press the ADD button.
6) Press the Bank Up/Down button to choose Bank 3.
7) Press Scene 2 button to select the scene 2.
8) Press the ADD button. The LCD displays”Saved”, meaning the
Step has been successfully added. Now the scene 2 of Bank 3 is the
new Step 5, the previous Step 5 turns into Step 6, the previous Step
6 turns into Step 7 and so on.
Delete a Step -
1) Enter program mode (See Enabling Program Mode).
2) Press the Chase button to select the desired chase you wish to de-
lete a Step. The LCD will display how many Steps have already been
stored in the chase.
3) Press the Tap Sync button.
4) Press the Bank Up/Down button to scroll to the Step which you
wish to delete. You can read the Step in the LCD Display.
5) Press the Delete button. The LCD displays “Delete this step? Press
Delete to confirm. Press add to cancel”.
6) When you press the Delete button again, the LCD will display
”Step Deleted”. You have now deleted the Step. If the LCD displays
”Deleted fail”, it means the scene delete failed.
EXAMPLE: Deleting Step 3 of Chase 4.
1) Enter program mode (See Enabling Program Mode).
2) Press Chase 4 button.The LCD will display how many Steps have
already been stored in the chase.
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 16
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 17
WiFly WLC16 Operation
WiFly WLC16 Operation
