ADJ Products, LLC www.adj.com - WiFly WLC16 Page 23
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 22
Pressing this button a second time will cancel this selection. The
LED with Chase programmed to the relevant button will flash when
the Chase is selected to play. If the chase has no data, the LCD will
display ”Empty”. If more than one Chase button has been pressed,
the controller will play the Chases in a continous loop in the order the
Chase buttons were pressed. All button LED’s with Chases pro-
grammed will be on, and the button LED of the current Chase will
flash.
3) Use the speed slider or Press the Tap Sync button twice to adjust
the speed, use Fade Time slider to adjust the fade time of the scene
progression.
4) Press the AUTO button to exit Auto mode.
Music Mode -
1) Press the SOUND button to activate Music mode.
2) Select your desired chase by pressing one of the six Chase but-
tons this will activate the chase and it will respond to the rhythms of
the music. Pressing the button again will cancel this selection. The
button LED of the selected Chase will flash when playing. If the chase
has no data, the LCD will display ”Empty”. If more than one Chase
button has been pressed, the controller will play the Chases in a con-
tinous loop in the order the Chase buttons were pressed. All button
LED’s with Chases programmed will be on, and the button LED of the
current Chase will flash.
3) Use the Fade time slider to adjust the fade time of the chase pro-
gression.
4) Press the SOUND button to exit music mode
SD CARD
General:
With the SD card slot, you can insert a SD card to record the data of
your controller. You can also edit the data of an SD card with a com-
puter then insert the SD card into the SD card slot of the controller to
run the data which contains scenes and chases.
WiFly WLC16 Operation
WiFly WLC16 Operation
SD Card -
The SD card capacity is 4GB max and the format of the SD card
must be either FAT or FATS. When using the SD card for the first time
format it.
Record Data Of Controller
Insert the SD card into the controller SD card slot, it will automatically
create a corresponding data file with the wifly radio channel, speed
time, password, scene, Bank, and chase that have been successfully
saved on controller.
With the data file created, open the SD card data with computer, you
will find three folders; a Bank folder, Chases folder, and Parameters
folder. See the next few pages for a description and examples of
these folders.
NOTE: All of these folders can be edited
