![background image](http://html1.mh-extra.com/html/american-dj/wifly-wlc16/wifly-wlc16_user-instructions_2923247007.webp)
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 12
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 13
WiFly WLC16 Operation
Record Code is Scene buttons 1, 2, 3 and 4. You may change the
Record Code to protect your programs.
Security for Your Programs -
To protect your programs from any editing by others. You may
change the Record Code.
1) Turn off the controller.
2) Press the hold the Record button and turn the controller back on
until the LCD displays ”Old Password:”, press the Scene buttons 1,
2, 3 and 4 (if you have changed the Record Code, please enter in the
new Record Code).
3) The LCD will display ”New Password”. Press the desired Scene
buttons to enter a new Record Code. The record Code consists of 4
Scene buttons (the same button or different buttons). Be sure your
new Record Code consists of 4 Scene number buttons.
4) Press the ADD button. If the LCD displays ”Saved”. You have suc-
cessfully stored the new Record Code. If the LCD displays ”Saved
fail”, this means the new Record Code failed.
5) Once the Record Code has been saved, the controller automati-
cally restart to the fixtures main screen.
IMPORTANT!!!
If you don’t remember your new Record Code, Scene buttons 1, 6
,6 and 8 is the universal code. You can Press in this record code to
enable the program anytime even if you don’t remember your Record
Code.
WIFLY CHANNEL
Setting a Wifly Channel -
1) Hold and press the blackout button, and then power on the con-
troller. The LCD will display SET WIFI Address [XX].
2) Press the Bank Up/Down buttons to choose your desired wifly
channel.
3) Press the RECORD button. If the LCD displays ”Saved” this means
the wifly radio channel has been successfully stored. If the LCD dis-
plays ”Saved fail” it means the wifly channel failed.
4) Press the blackout button again to exit wifly radio channel set
mode.
SCENES
Programming A Scene -
1) Enter program mode (See Enabling Program Mode on Page 11)
2) Check the blackout key and verify that the LED is not lit, if it is
press it once to exit blackout mode.
3) Press the fixture button corresponding to the unit you wish to con-
trol. You may control more than one fixture at time by pressing the
fixture buttons corresponding to the fixture(s) you wish to program.
4) Move the faders to the desired position. If necessary, you may
select page B to control channels 17-32.
5) Press the Bank Up/Down button to choose the Bank you want to
store the scene into. There are a total of 30 Banks you can select
from, and you may store up to 16 scenes in each Bank. In each Bank,
the scene buttons that contain data the LED will glow green. This lets
the user know that there is a scene already programmed there.
6) Press the ADD button.
7) Press the scene button you wish to store your scene into. The LCD
readout will show the Bank and scene. If the LCD displays ”Saved”,
You have successfully stored the scene. If the LCD displays ”Saved
fail”, this means the scene store failed. If a scene button, that already
includes scene data, is selected, the LCD displays “Overwrite”. If
you want to overwrite the previous data, press the ADD button and
the LCD displays ”Saved”, this means the scene has been success-
fully stored. If do not want to overwrite, press DELETE button and the
LCD display will return to the previous screen.
Example Scene Program -
1) Enter program mode (See Enabling Program Mode)
2) Press the Fixture button to turn on its fader control.
3) Verify that the page select is set on page A, if not press the page
select button to select page A.
WiFly WLC16 Operation