ADJ Products, LLC www.adj.com - WiFly WLC16 Page 15
4) When you press the Delete button again, the LCD will display
”Bank Deleted”. You have now deleted the scene. If the LCD displays
”Deleted fail”, it means the scenes delete failed.
Deleting All Scenes -
1) Enter program mode (See Enabling Program Mode).
2) Use the Bank Up/Down button to choose any one of the Banks
3) Press any one of scene buttons to set to scene 0.
4) Press the Delete button for about 15 seconds. The display will
show “Delete all banks? Press Delete to confirm. Press add to can-
cel”.
5) When you press the Delete button again, the LCD will display
”Banks Deleted”. You have now deleted all the scenes. If the LCD
displays ”Deleted fail”, it means the scenes delete failed.
CHASES
Note: You must have already programmed scenes in order to pro-
gram a chase. This function allows you to cycle through up to 480
scenes in a preselected order. It is recommended before program-
ming chases for the first time you delete all chases in the controller.
See Delete All Chases for instructions on how to do so.
Copy A Scene of a Bank to a Chase -
1) Enter program mode (See Enabling Program Mode).
2) Press the Chase button to select the chase you wish to program.
The LCD will display how many Steps have already been stored in
the chase if the chase already has been programmed.
3) Press the Bank Up/Down button to choose the desired Bank that
has scenes stored inside it. In each Bank, the LED will glow green if
the scene button contains data.
4) Press the desired Scene button to select the scene you wish to
copy to the desired chase.
5) Press the ADD button. If the LCD displays ”Saved”, it means
the chase scene has been successfully stored. If the LCD displays
WiFly WLC16 Operation
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 14
4) Move the first and second faders all the way up to their maximum
position.
5) Select Bank 1 using the Bank Up/Down buttons. In Bank 1, the
scene buttons that contain data the corresponding LED will glow
green. This lets you know that there is a scene already programmed
there.
6) Press the ADD button.
7) Press scene 1 to store the first scene. The LCD displays ”Saved”,
You have now successfully stored the scene. If scene 1 already
includes scene data, the LCD displays “Overwrite”, press the ADD
button and the LCD will display ”Saved”, which means the
scene has been successfully been stored.
Deleting A Scene In A Bank-
1) Enter program mode (See Enabling Program Mode).
2) Press the Bank Up/Down button to choose the Bank you want to
delete this scene. In each Bank, the scene button that contains data
the corresponding LED will glow green. This lets you know that there
is a scene programmed there.
3) Press the desired Scene button to select the scene you wish to
delete.
4) Press Delete button. The display will show “Delete this scene?
Press Delete to confirm. Press add to cancel”.
5) When you press the Delete button again, the LCD will display
”Scene Deleted”. You have now deleted the scene. If the LCD dis-
plays ”Deleted fail”, it means the scene delete failed.
Deleting All Scenes In A Bank -
1) Enter program mode (See Enabling Program Mode).
2) Press the Bank Up/Down button to choose the Bank you want to
delete all the scenes.
3) Press Delete button. The display will show “Delete this bank?
Press Delete to confirm. Press add to cancel”.
WiFly WLC16 Operation
