American DJ
®
- www.americandj.com - Quad Scan LED Instruction Manual Page 13
American DJ
®
- www.americandj.com - Quad Scan LED Instruction Manual Page 14
ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running time
of the fixture.
1. Press the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- With this function you can display the version soft-
ware of the fixture.
1. Press the MENU button until “
VER
” is displayed, press
ENTER.
2. The software version will now be displayed. Press MENU to
exit
RSET
- Use this function to reset the unit.
1. Press the MENU button until “
RSET
” is displayed, press
ENTER.
2. The fixture will now reset
Quad Scan LED
System Menu
Operating Modes: The Quad Scan LED can operate in three
different modes. In each mode you can run the fixture as a
stand alone fixture or in a master/slave confiugration.
Universal DMX Control:
This function allows you to use a univer-
sal DMX-512 controller to control the chases and patterns, dimmer
and strobe. A DMX controller allows you to create unique programs
tailored to your individual needs.
1. The Quad Scan LED can be a 1, 5, or 28 DMX channel fixture.
See pages 16-21 for detailed description of the DMX values and
traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 6-8 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
5. Follow the instructions on page 10 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Tap the MENU button until
“
SOUN
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons to choose either OFF or ON, and
press ENTER, then press and hold MENU for 3 seconds to con-
firm.
3. When running Sound Active mode you can adjust the sound sensi
tivity, by pressing the MENU button until “
SENS
” is displayed, and
press ENTER. Now use the UP or DOWN buttons to adjust the
sound sensitivity. 0 being the least sensitive and 100 the most
sensitive. When you have found your desired sensitivity level,
press ENTER to confirm.
4. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Show Mode:
In this mode you can select 1 of 16 shows to run.
1. Tap the MENU button until
“
SHND
” is displayed, and press
Quad Scan LED
Operation
