American DJ Quad Scan LED, User Instructions

Page: 6 / 12

American DJ
®
- www.americandj.com - Quad Scan LED Instruction Manual Page 11
American DJ
®
- www.americandj.com - Quad Scan LED Instruction Manual Page 12
ENTER.
2. The display will show either “
ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to keep the LED display on at
all times, or “ OFF ” to switch to have the LED display switch off
after 10 seconds.
3.
Press the ENTER button to confirm.
PAN -
Pan Inversion
1. Tap the MENU button until “ PAN ” is displayed, press ENTER.
Either Yes or No will be displayed.
2. To activate the Pan inversion tap the UP or DOWN buttons
until YES is displayed, press ENTER to confim. To deactivate
Pan inversion, select NO and press Enter.
TILT -
Tilt Inversion
1. Tap the MENU button until “ TILT ” is displayed, press ENTER.
Either YES or NO will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until YES is displayed, press ENTER to confim. To deactivate
Tilt inversion, select NO and press Enter.
DISP
- This will “flip” the LED display 180º.
1. Press the MENU button until “d ISP ” is displayed, press ENTER.
2. Either “d ISP ” or “d SIP ” will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3.
Press the ENTER button to confirm.
TEST
- This function will run a self test program.
1. Press the MENU button until “ TEST ” is displayed, press
Quad Scan LED System Menu
between 0-16. Programs 0-16 are factory programs, while Show
0 is random mode. Press the UP or DOWN buttons to find your
desired show and press the ENTER, then press and hold the
MENU button for at least 3 seconds to confirm.
SOUN -
Sound Active mode.
1. Press the MENU button until “ SOUN ” is displayed, press
ENTER.
2. The display will show either “
ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to activate sound active mode, or
“ OFF ” to deactivate sound active mode.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
SENS -
Sound sensitivity control.
1. Press the MENU button until “ SENS ” is displayed, press ENTER.
2. The display will show a number between 0-100. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least sen-
sitive and 100 the most sensitive.
3. Press the ENTER button to confirm.
BLND -
Blackout or Stand by mode.
1. Press the MENU button until “ BLND ” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “ LED ” is displayed, press
Quad Scan LED System Menu