American DJ Quad Scan LED, User Instructions

Page: 5 / 12

American DJ
®
- www.americandj.com - Quad Scan LED Instruction Manual Page 10 American DJ
®
- www.americandj.com - Quad Scan LED Instruction Manual Page 9
Quad Scan LED System Menu
ADDR -
DMX Address Setting .
1. Press the either the MENU, UP, or DOWN buttons until
“ ADDR ” is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
CHND -
This will let select your desired DMX mode.
1. Press the either the MENU button until “ CHND ” is displayed,
press ENTER. Either “ 1CH ”, “ 5CH ” or “ 28CH ” will be displayed
2. Press the UP or DOWN buttons to choose your desired DMX
mode and press ENTER to confim and exit.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Press the MENU button until “ SLND ” is displayed, press
ENTER. Either “ MAST ”, “ SL 1 ” or “ SL 2 ” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture
to Master or Slave 1 (SL 1) and then set the next fixture to Slave
2 (SL 2), in doing this the fixtures will now have contrast move-
ment to each other.
SHND: SH 0 - SH16
- Show modes 0-16 (Factory programs).
Show mode can be run with sound activity or without. For show
mode to run without sound activity turn sound activity off.
1. Press the MENU button until “
SHND ” is displayed, press
ENTER.
2. “
S h X ” will now be displayed, “X” representing a number
Quad Scan LED System Menu Chart