ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 20
ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 21
Inno Spot LED WiFly
DMX Traits
Channel Value
Function
1 0 - 255 540° PAN
2 0 - 255 270° TILT
3 COLORS
0 - 14 WHITE
15 - 28 RED
29 - 42 BLUE
43 - 56 GREEN
57 - 70 YELLOW
71 - 84 PINK
85 - 98 LIGHT BLUE
99 - 112 LIGHT GREEN
113 - 127 LIGHT YELLOW
128 - 254 RAINBOW EFFECT SLOW - FAST
255 SOUND ACTIVE
4 GOBO WHEEL
0 - 9 OPEN
10 - 18 GOBO 1
19 - 27 GOBO 2
28 - 36 GOBO 3
37 - 46 GOBO 4
47 - 55 GOBO 5
56 - 63 GOBO 6
64 - 73 OPEN SHAKE
74 - 82 GOBO 1 SHAKE
83 - 91 GOBO 2 SHAKE
92 - 100 GOBO 3 SHAKE
101 - 110 GOBO 4 SHAKE
111 - 119 GOBO 5 SHAKE
120 - 127 GOBO 6 SHAKE
128 - 254 GOBO WHEEL ROTATION SLOW - FAST
255 SOUND ACTIVE
5 GOBO ROTATION
0 - 9 STOP
10 - 120 CLOCKWISE FAST - SLOW
121 - 134 STOP
135 - 245 COUNTER-CLOCKWISE SLOW - FAST
246 - 255 STOP
DMX Mode:
Your DMX controller must be connected to a ADJ WiFly
TransCeiver (sold separately). Operating through a DMX controller
gives the user the freedom to create their own programs tailored to
their own individual needs. You are able to communicate up to 400
feet (open line of sight). The Inno Spot LED WiFly has 10 DMX chan-
nels. See pages 21-22 for the DMX traits.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
“Addr” is displayed, and press ENTER. The current address that
is set will be displayed Use the UP or DOWN buttons to select
your desired DMX address, then press ENTER.
3. After you have set your DMX address you need to set the WiFly
address. Follow the instructions on page 11 to set the Wireless
address. The address must match the address set on the WiFly
Transceiver.
4. After choosing your WiFly address, you need to activate WiFly
mode. Follow the instructions on page 11 to activate the WiFly
Mode.
5. Apply power to the ADJ WiFly Transceiver. The fixture must be
set up to the same address as the fixture first before you apply
power to WiFly TransCeiver.
6. If everything is set up properly and the fixture is receiving a
Wireless signal, the strength of the WiFly signal will be displayed
in the WiFly signal status window located on the rear of the unit.
Inno Spot LED WiFly
WiFly DMX Operation
