American DJ INNO SPOT LED WIFLY, User Instructions

Page: 8 / 14

ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 15 ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 14
DISP -
This function will reverse the display 180º.
1. Press the MENU button until “ DISP ” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it again.
Press ENTER when you have made your desired setup.
FADJ
- This function will allow you to focus the lens for a
clear LED output.
1. Press the MENU button until “ FADJ ” is displayed, press ENTER.
The fixture will turn a different way each time the ENTER button is
pressed.
2. With the spot pointed at a flat wall or surface, at the distance it will
be set up, you can turn the lens to adjust the clarity. Press MENU to
exit.
TEST
- This function will run a self test program. The test
program will test pan/tilt movement and colors.
1. Press the MENU button until “ TEST ” is displayed, press ENTER.
2. The fixture will now run a self test.
TEMP
- With this function you can check the temperature
of the fixture.
1. Press the MENU button until “ TEMP ” is displayed, press ENTER.
2. The temperature of the fixture will now be displayed. Press MENU
to exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “ FHRS ” is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU
to exit.
Inno Spot LED WiFly System Menu
Inno Spot LED WiFly System Menu
VER
- With this function you can display the version soft-
ware of the unit.
1. Press the MENU button until “ VER ” is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to exit.
RSET
- Use this function to reset the unit.
1. Press the MENU button until “ RSET ” is displayed, press ENTER.
2. The fixture will now reset.