background image

  Inno Spot LED WiFly                                          Cleaning

  Inno Spot LED WiFly    

 

      Trouble Shooting

Trouble Shooting: Listed below are a few common problems that 

you may encounter, with solutions.
No light output from the unit;
1.   Be sure you have connected your unit into a standard 120v wall  

   outlet. Be sure to voltage selector switch in the correct position. 

2.    Be sure the external fuse has not blown. The fuse is located on  

   the rear panel of the unit. 

3.   Be sure the fuse holder is completely and properly seated. 

 

Unit does not respond to sound;
1.     Low frequencies (bass) should cause the unit to react to sound.

    Tapping on the microphone, quiet or high pitched sounds may

   not activate the unit.  

Due to fog residue, smoke, and dust cleaning the internal and exter-

nal  optical  lenses  and  mirror  should  be  carried  out  periodically  to 

optimize light output. Cleaning frequency depends on the environ-

ment  in  which  the  fixture  operates  (I.e.  smoke,  fog  residue,  dust, 

dew). In heavy club use we recommend cleaning on a monthly basis. 

Periodic cleaning will ensure longevity, and crisp output.
1.  Use normal glass cleaner and a soft cloth to wipe down the out- 

  side casing.

2.   Use a brush to wipe down the cooling vents and fan grill.

3.   Clean the external optics with glass cleaner and a soft  cloth every  

  20 days.

4.   Clean the internal optics with glass cleaner and a soft cloth every  

  30-60 days.

5.  Always be sure to dry all parts completely before plugging the unit  

  back in.

  Inno Spot LED WiFly 

                               Fuse Replacement

Locate and remove the unit’s power cord. Once the cord has been 

removed  located  the  fuse  holder  located  inside  the  power  socket. 

Insert a flat-head screw driver into the power socket and gently pry 

out the fuse holder. Remove the bad fuse and replace with a new one. 

The fuse holder has a built-in socket for a spare fuse be sure not to 

confuse the spare fuse with active fuse.

ADJ Products, LLC  -  www.adj.com  - Inno Spot LED WiFly Instruction Manual Page 25

ADJ Products, LLC  -  www.adj.com  - Inno Spot LED WiFly Instruction Manual Page 24

  Inno Spot LED WiFly 

                               Photometric Chart

Summary of Contents for INNO SPOT LED WIFLY















Reviews: