VDP250SC4
1 VELLEMAN
VDP250SC4 – EMOTION 250
1. Introduction & Features
Thank you for buying the
VDP250SC4
! It is moulded in new extra strong and heat-resistant plastic materials, which
weigh far less and are more streamlined than a traditional metal case. It features a highly effective lighting system,
comprised of filters and lenses with anti-reflection coatings, enhancing light efficiency by 30% and making colours
more vivid and patterns clearer. The device is DMX512-controlled and equipped with 6 gobos that can be projected
in 7 c white. The device is equipped with blackout, flash and manual focusing functions. Characteristics:
stable, smooth and quiet operation, reliable and safe thanks to the integrated overheating protection. Please read the
manual thoroughly before bringing this device into service.
Make sure there is no damage caused by transportation. Should there be any, don’t install the device and consult
your dealer.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
•
A qualified technician should install and service this device.
•
Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
•
This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified
person carry out the electric connection.
•
Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
•
Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
•
Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
•
There may be some smoke or a particular smell when the device is activated for the first time. This is normal and
any smoke or smell will gradually disappear.
•
Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.
•
Note that damage caused by user modifications to the device are not covered by the warranty.
•
Keep the device away from children and unauthorised users.
3. General Guidelines
•
This device is designed for professional use on stage, in discos, theatres, etc. The
VDP250SC4
should only be
used indoors with an alternating current of max. 230V AC/50Hz.
•
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
•
Do not shake the device. Avoid brute force when installing or operating the device.
•
Select a location where the device is protected against extreme heat (see “
7. Technical Specifications
”, p.4), dust
and moisture. Respect a minimum distance of 0.5m between the device’s light output and any illuminated surface.
•
Use an appropriate safety cable to fix the device (e.g.
VDLSC7
or
VDLSC8
).
