![background image](http://html1.mh-extra.com/html/american-dj/fp-cfc/fp-cfc_operation-manual_2922613030.webp)
FP CFC
©American DJ Supply
Page 30 of 31
FP CFC
Notice:
1) The name must the same as the run chart
, otherwise the FP CFC controller will not
work normally.
2) Make sure that the name of the run chart has no space between the "
"a nd the
"
"
Example 4: Link the previous 2x2 FP CFC by fixation method 4.
4.1 Open the previous address link list “2x2(mode4).bin_Prj.txt”
, the picture is as
follows:
Note:
This means that the first export of the FP CFC controller connects to the light "1,1" whose vertical
coordinate is 1 and the horizontal coordinate is 2 in the screen, then the light "1,1" connects to the
light"1,2"whose vertical coordinate is 1 and the horizontal coordinate is 2 in the screen.T he link
method of the second export is also the same.
4.2 The link picture of 2x2 FP CFC by fixation method 4.
Notice:
1) All the lights must be fixed by fixation method 4, the joining of the adjacent lights must be
close, make sure there is no opening/gap between the two adjacent lights.
2) Copy the run chart
to the CF card.