![background image](http://html1.mh-extra.com/html/american-dj/fp-cfc/fp-cfc_operation-manual_2922613023.webp)
FP CFC
©American DJ Supply
Page 23 of 31
FP CFC
Note:
1) The two numbers in each grid is separated by comma. The first number is the number of the
output that the light is connected to; the second number is the address number of the light.
2) The "1,2" means the light whose vertical coordinate is 1 and the horizontal coordinate is 1
connects to the first output, and its address is 2; The "1,1" means the light whose vertical
coordinate is 2 and the horizontal coordinate is 1 connects to the first output, and its address is 1;
The "2,2" means the light whose vertical coordinate is 1 and the horizontal coordinate is 2
connects to the second output, and its address is 2; The "2,1" means the light whose vertical
coordinate is 2 and the horizontal coordinate is 2 connects to the second output of the screen, and
its address is 2.
3) You should always input the number corresponding to the previous picture "Link by fixation
method 3". The light of the same vertical line connects to the same output of the controller. The
address of the light starts with address1 and steadily increases by.
3.4 Click
, select the location of where you want to put the BIN file and then
name the file. In the below image, the file has been named "2x2(mode3)".
3.5 Click
and
will be displayed. Next, click
to get
the run chart "2x2(mode3).bin" and the address link list “2x2(mode3).bin_Prj.txt” (See diagram
on the next page).