![background image](http://html1.mh-extra.com/html/american-dj/fp-cfc/fp-cfc_operation-manual_2922613026.webp)
FP CFC
©American DJ Supply
Page 26 of 31
FP CFC
When there are more than 128 lights, you need to link to the slave controllers to control the whole
screen. The method for creating the run chart and the address link list is the same. The point that is
different is that the export number of the “Device Address List” is not the same as its number
marked on the slave controllers.
Note:
1) Make sure the fixation method of the lights in the screen is the same. The conjunction of the
adjacent lights must be closed, make sure there is no aperture between the two adjacent lights.
2) The output number of the No.1 slave controller ranges from 9 to 16 in the “Device Address
List”, the output number of the No.2 slave controller ranges from 17 to 24 in the “Device Address
List”, the output number of the No.3 slave controller ranges from 25 to 32 in the “Device Address
List”.
3) The output number marked on the master controller is the same as the output number of the
“Device Address List”, the output number marked on the No.1 slave controller add 8 is its export
number of the “Device Address List”, the output number marked on the No.2 slave controller add
16 is its output number of the “Device Address List”, the output number marked on the No.3 slave
controller add 24 is its export number of the “Device Address List”.
4) The method for creating the run chart and the address link list is the same as when there is just
one master controller.
D. How To Link The FP CFC
Example 1: Link the previous 2x2 FP CFC by fixation method 1.
1.1 Open the previous address link list“2x2(mode1). bin_Prj.txt”,the picture is as follows:
Note: