FP CFC
©American DJ Supply
Page 2 of 31
FP CFC
FP CFC Operation Manual
The FP CFC controller can be controlled using a 512-DMX console. The Flash Panel 16 together
with the FP CFC controller can make colorful and dynamic light scenery effects.
Customer Support:
American DJ
_
provides a toll free customer support line, to provide set up
help and to answer any question should you encounter problems during your set up or initial
operation. You may also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 4:30 p.m. Pacific Standard
Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail: [email protected]
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to
rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs
yourself, doing so will void your manufactures warranty. In the unlikely event your unit may
require service please contact American DJ
_
.
PLEASE recycle the shipping carton when ever possible.
A.
Parameter Of FP CFC Control System
Picture 1:The link diagram for the total FP CFC control system
Note:
1) Every export of the FP CFC controller can link 16pcs slim wall lights at most. So every
controller can control 128pcs at the most. The signal output connector for the last light should be
stopped by a Teminator (1 pc 120_ resistor inside) in order to prevent signal interruption. One
controller can control 128pcs but no more then that. When there are more than 128pcs, you will
need to link to a slave controller to control the other lights.
2) Make sure the fixation method of the lights in the screen is the same. The conjunction of the
adjacent lights must be close. Make sure there is no aperture between the two adjacent lights.
