![background image](http://html1.mh-extra.com/html/american-dj/fp-cfc/fp-cfc_operation-manual_2922613029.webp)
FP CFC
©American DJ Supply
Page 29 of 31
FP CFC
work normally.
2) Make sure that the name of the run chart has no space between the "
" and the
"
"
Example 3: Link the previous 2x2 FP CFC by fixation method 3.
3.1 Open the previous address link list“2x2(mode3). bin_Prj.txt”
, the picture is as
follows:
Note:
This means that the first export of the FP CFC controller connects to the light "1,1" whose vertical
coordinate is 1 and the horizontal coordinate is 1 in the screen, then the light "1,1" connects to the
light "1,2" whose vertical coordinate is 1 and the horizontal coordinate is 2 in the screen. The link
method of the second export is also the same.
3.2 The link picture of 2x2 FP CFC by fixation method 3.
Notice:
1) All the lights must be fixed by fixation method 3, the joining of the adjacent lights must be
close, make sure there is no opening/gap between the two adjacent lights.
2) Copy the run chart
to the CF card.
3.3 Double-click the Configuration Setting file
of the CF card,copy the name of the
run chart
between the "
" and the "
", then save it.