background image

American DJ

®

  -  www.americandj.com  - Accu Spot Pro Instruction Manual Page 43

American DJ

®

  -  www.americandj.com  - Accu Spot Pro Instruction Manual Page 44

  Accu Spot Pro    

                           DMX Traits cont.

  Accu Spot Pro    

                           DMX Traits cont.

  Channel     Value 

 

         Function

       6                                          ROTATING GOBOS CONT.
                     170 - 189         GOBO 6 SHAKE  SLOW - FAST      
                     190 - 255       ROTATING GOBO WHEEL SCROLL
                                                            SLOW - FAST  
       7                                          ROTATING GOBO INDEX
                         0 - 127                      GOBO INDEXING
                     128 - 187          FORWARDS GOBO ROTATION               
                                                              FAST - SLOW
                     188 - 193                         NO ROTATION                                                                                            
                     194 - 255         BACKWARDS GOBO ROTATION               
                                                              SLOW - FAST
       8                                                  FIXED GOBOS
                         0 - 13                           SPOT/OPEN 
                       14 - 27                               GOBO 1 
                       28 - 41                               GOBO 2
                       42 - 55                               GOBO 3
                       56 - 69                               GOBO 4 
                       70 - 83                               GOBO 5
                       84 - 97                               GOBO 6      
                       98 - 111                             GOBO 7 
                     112 - 127        GOBO 1 SHAKE   SLOW - FAST
                     128 - 143        GOBO 2 SHAKE   SLOW - FAST
                     144 - 159        GOBO 3 SHAKE   SLOW - FAST
                     160 - 175        GOBO 4 SHAKE   SLOW - FAST              
                     176 - 191        GOBO 5 SHAKE   SLOW - FAST
                     192 - 207        GOBO 6 SHAKE   SLOW - FAST
                     208 - 223        GOBO 7 SHAKE   SLOW - FAST
                     224 - 255             GOBO WHEEL ROTATION
                                                            SLOW - FAST              

  Channel     Value 

 

         Function

       9                                               ROTATING PRISM,
                                                   PRISM/GOBO MACROS
                         0 - 3                                 OPEN
                         4 - 63             FORWARD PRISM ROTATION  
 

 

 

 

 

      FAST - SLOW            

                       64 - 67                         NO ROTATION
                       68 - 127        BACKWARDS PRISM ROTATION 
                                                            SLOW - FAST               
                     128 - 135                          MACRO 1
                     136 - 143                          MACRO 2
                     144 - 151                          MACRO 3
                     152 - 159                          MACRO 4
                     160 - 167                          MACRO 5
                     168 - 175                          MACRO 6
                     176 - 183                          MACRO 7
                     184 - 191                          MACRO 8                  
                     192 - 199                          MACRO 9
                     200 - 207                          MACRO 10
                     208 - 215                          MACRO 11
                     216 - 223                          MACRO 12
                     224 - 231                          MACRO 13                    
                     232 - 239                          MACRO 14  
                     240 - 247                          MACRO 15   
                     248 - 255                          MACRO 16
      10

  

                                                      FOCUS

                         0 - 255       ADJUSTMENT FROM FAR - NEAR
      11                                           SHUTTER & STROBE
                         0 - 31                    SHUTTER CLOSED
                       32 - 63                      SHUTTER OPEN
                       64 - 95                      STROBE EFFECT
                                                           SLOW - FAST
                       96 - 127                     SHUTTER OPEN
                     128 - 159                      PULSE EFFECT

Summary of Contents for Accu Spot Pro



























Reviews: