American DJ Accu Spot Pro User Instructions Download

Page: 12 / 26

American DJ

- www.americandj.com - Accu Spot Pro Instruction Manual Page 24

American DJ

- www.americandj.com - Accu Spot Pro Instruction Manual Page 23

DISP

MAIN MENU -

VALU

Display the DMX-512 value of each channel -

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

DISP

” is displayed, press ENTER.

3. Tap the UP button until “

VALU

” is displayed, press ENTER.

4. The display should show “

D-00

”. Press the UP button in

order to select the desired channel. If you select “

D-05

” the

display will only show the DMX value of the 5th channel

5. Press ENTER to confirm.

6. Press MODE/ESC to return to the main menu.

Now the display will change as per the 5th channel DMX

value.

D ON

Turns the digital display on and off -

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

DISP

” is displayed, press ENTER.

3. Tap the UP button until “

D ON

” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “

” to acti-

vate this function, or “

OFF

” to deactivate this function.

5. Press ENTER to confirm.

6. Press MODE/ESC to return to the main menu.

FLIP

This function will reverse the display 180º.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

DISP

” is displayed.

Accu Spot Pro

System Menu

Accu Spot Pro

System Menu

3. Tap the UP button until “

FINE

” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “

” to acti-

vate this function, or “

OFF

” to deactivate this function.

5. Press ENTER to confirm.

6. Press MODE/ESC to return to the main menu.

DEGR

MENU -

DEGR

With this function you can switch the Pan degree.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

DEGR

” is displayed, press ENTER.

3. Press the UP or DOWN buttons to select either “

630

” or

“

540

”.

4. Press ENTER to confirm your selection.

5. Press MODE/ESC to return to the main menu.

MIC

MENU -

MIC

The internal microphone can be made more or less

sensitive.

1. Access the main menu by pressing MODE/ESC button.
3. Tap the UP button until “

MIC

” is displayed, press ENTER.

4. The display will show “

M-01

”.

5. Press the UP or DOWN button to adjust the microphone sen-
sitivity between “

M-01 - M-99

”.

6. Press ENTER to confirm when you have reached your

desired microphone sesitivity level.
7. Press MODE/ESC to return to the main menu.

Summary of Contents for Accu Spot Pro



























Search results

Summary of Contents for Accu Spot Pro

Reviews:

Related manuals for Accu Spot Pro

Brands by name

Popular brands

American DJ Accu Spot Pro, User Instructions

Search results

Summary of Contents for Accu Spot Pro

Reviews:

Related manuals for Accu Spot Pro

Brands by name

Popular brands