American DJ
®
- www.americandj.com - Accu Spot Pro Instruction Manual Page 8
American DJ
®
- www.americandj.com - Accu Spot Pro Instruction Manual Page 7
Accu Spot Pro
Controls and Functions
REAR
FRONT
Accu Spot Pro
Controls and Functions
1. Lens Assembly -
This is a high quality lens that is focused by
using the Lamp Optimization in DMX Mode.
2. Software Update Input Jack -
This jack is used to update the
latest software version into the unit.
3. Digital Display -
This display shows the menu and operating func-
tions that you can choose from.
4. Mode/ESC Button -
This button is used to exit menus and to scroll
backwards through certain menus only.
5. Up Button -
This button is used to scroll forward when navigating
through the system menu.
6. Down Button -
This button is used to scroll backwards when navi-
gating through the system menu.
7. Enter Button -
This button is used to select and confirm a func
-
tion when working in the system menu. It is also used to exit certain
menus.
8. Carrying Handles -
The includes built-in carrying handles. Be sure
to always handle the unit by the built-in handles. Never lift or carry-
ing the unit by head or yoke. Pulling on or transporting the unit by the
moving head may severely damage the unit and will void the unit war-
ranty.
7. Microphone -
This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
9. XLR Output Jack -
This jack is used to transmit the incoming
DMX signal to another DMX fixture, or transmit a Master/Slave signal
to the next Accu Spot Pro in the chain. For best results in DMX or
Master/Slave mode terminate this jack if it is the last unit in the chain.
See “Terminator” on page 11.
10. XLR DMX Input Jack -
This jack is used to receive an incoming
DMX signal or Master/Slave signal.
11. Fuse Holder -
This housing stores a 8 amp (4 amp 220v) GMA pro-
tective fuse. Never defeat the fuse, the fuse is designed to protect the
1
4
3
12
11
8
13
6
5
7
9 10
8
2
