background image

 Accu Spot Pro    

 

 

                    Warranty

  Accu Spot Pro    

 

 

                    Cleaning

  Accu Spot Pro    

 

               Trouble Shooting

Trouble  Shooting:

  Listed  below  are  a  few  common  problems  that 

you may encounter, with solutions.

No light output from the unit;

1.   Be sure you have connected your unit into a standard 120v wall  
 

 outlet.  

2.  

  Be sure the external fuse has not blown. The fuse is located at  

 

 the rear of the unit. 

3.    Remove the lamp holder and be sure the lamp is seated in its   
 

 socket properly. Occasionally lamps become loose during ship- 

 

 ping be sure the lamp is push in to its socket all the way.

4.   Be sure the fuse holder is completely and properly seated. 

 

Unit does not respond to sound;

1.     Low frequencies (bass) should cause the unit to react to sound.
    Tapping on the microphone, quiet or high pitched sounds may
 

 not activate the unit.  

Fixture Cleaning:

 Due to fog residue, smoke, and dust cleaning the 

internal and external optical lenses and mirror should be carried out 

periodically to optimize light output. Cleaning frequency depends on 

the environment in which the fixture operates (I.e. smoke, fog residue, 

dust, dew). In heavy club use we recommend cleaning on a monthly 
basis. Periodic cleaning will ensure longevity, and crisp output.
1.   Use normal glass cleaner and a soft cloth to wipe down the out- 
 

side casing.

2.   Use a brush to wipe down the cooling vents and fan grill.

3.   Clean the external optics and mirror with glass cleaner and a soft  

 

cloth every 20 days.

4.   Clean the internal optics with glass cleaner and a soft cloth every  
 

30-60 days.

5.  Always be sure to dry all parts completely before plugging the unit  
 

back in.

American DJ

®

  -  www.americandj.com  - Accu Spot Pro Instruction Manual Page 47

American DJ

®

  -  www.americandj.com  - Accu Spot Pro Instruction Manual Page 48

MANUFACTURER’S LIMITED WARRANTY
A.  

American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American 

Audio products to be free of manufacturing defects in material and workmanship for a prescribed 

period from the date of purchase (see specific warranty period on reverse). This warranty shall be 

valid only if the product is purchased within the United States of America, including possessions 
and territories. It is the owner’s responsibility to establish the date and place of purchase by ac-
ceptable evidence, at the time service is sought. 
B. 

For warranty service you must obtain a Return Authorization number (RA#) before 

sending back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send 
the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the 
requested repairs or service (including parts replacement) are within the terms of this warranty, 
American DJ, Inc. will pay return shipping charges only to a designated point within the United 
States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories 
should be shipped with the product. If any accessories are shipped with the product, American DJ, 
Inc. shall have no liability whatsoever for loss of or damage to any such accessories, nor for the 
safe return thereof.  
C.  

This warranty is void if the serial number has been altered or removed; if the product is 

modified in any manner which American DJ, Inc. concludes, after inspection, affects the reliability 

of the product; if the product has been repaired or serviced by anyone other than the American DJ, 
Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the 
product is damaged because not properly maintained as set forth in the instruction manual. 
D. 

This is not a service contract, and this warranty does not include maintenance, cleaning 

or periodic check-up. During the period specified above, American DJ, Inc. will replace defec

-

tive parts at its expense with new or refurbished parts, and will absorb all expenses for warranty 

service and repair labor by reason of defects in material or workmanship.  The sole responsibility 
of American DJ, Inc. under this warranty shall be limited to the repair of the product, or replace-
ment thereof, including parts, at the sole discretion of American DJ.  All products covered by this 
warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. 
E. 

American DJ, Inc. reserves the right to make changes in design and/or improvements 

upon its products without any obligation to include these changes in any products theretofore 

manufactured. No warranty, whether expressed or implied, is given or made with respect to any 
accessory supplied with products described above. Except to the extent prohibited by applicable 

law, all implied warranties made by American DJ, Inc. in connection with this product, including 

warranties of merchantability or fitness, are limited in duration to the warranty period set forth 
above. And no warranties, whether expressed or implied, including warranties of merchantability 
or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s 
sole remedy shall be such repair or replacement as is expressly provided above; and under no 

circumstances shall American DJ, Inc. be liable for any loss or damage, direct or consequential, 
arising out of the use of, or inability to use, this product.  
This warranty is the only written warranty applicable to American DJ and American Audio  
Products and supersedes all prior warranties and written descriptions of warranty terms and 
conditions heretofore published. 
MANUFACTURER’S LIMITED WARRANTY PERIODS:

• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Ampli

-

fiers) 
• All American Audio V-Plus Series Amplifiers = 3-year (1095 day) Limited Warranty

• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty 
(Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble 

Machines, Mirror Balls, Par  Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps, 

and Star Tec Series) 
• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty

• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors which 

have a 1-year (365 day Limited Warranty)

Summary of Contents for Accu Spot Pro



























Reviews: