4. Press MODE/ESC to exit.
PLAY
MAIN MENU -
RUN
Run the unit in an Auto mode as a “master” in a
Master/Slave configuration, or as a stand alone unit -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
RUN
” is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
“, select your choice by pressing ENTER, “
PASS
” will flash
in the display and fixture will begin its function.
AUDI
Run the unit in Sound Active mode as a “master”, or
as a stand alone unit -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
AUDI
” is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
“, select your choice and press ENTER.
AUTO
This is a precaution mode in case you lose the DMX
signal. The fixtue has 4 modes to choose from, please see
page 14 for a description of the 4 modes -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
AUTO
” is displayed, press ENTER.
4. Now you can choose between “
CLOSE
”, “
HOLD
” “
AUTO
”, or
“
AUDI
”. “
HOLD
” is the default setting.
American DJ
®
- www.americandj.com - Accu Spot Pro Instruction Manual Page 18
American DJ
®
- www.americandj.com - Accu Spot Pro Instruction Manual Page 17
Accu Spot Pro
System Menu
On-Board System Menu.
The Accu Spot Pro comes with an easy
to navigate system menu. This next section will detail the functions of
each command in the system menu.
To access the main menu press the MODE/ESC button
(7)
on the front
of the unit. Tap the UP
(5)
or DOWN
(6)
butons until you reach function
you wish to change. When you reach the function you wish to change
tap the ENTER button
.
Again, tap the
UP or DOWN buttons to change
the function. Once your changes are made, tap the ENTER button
to
lock the change in the system, if the ENTER button
is not selected
within eight seconds the system will automatically return to menu sec-
tion. To exit without making any changes tap the
MODE/ESC button
(4)
.
Accu Spot Pro
System Menu
ADDR
MAIN MENU -
ADDR
DMX Address Setting
via control board -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “
ADDR
” is displayed, press ENTER.
4. Now the display will show “
A001
”. Adjust the DMX address
by pressing the UP or DOWN buttons.
5. Press ENTER to confirm.
6. Press the MODE/ESC button to return to the main menu.
When the display is on
“
A001
”,
you can directly press the UP
or DN buttons to change the DMX start address.
TEST
MAIN MENU -
TEST
- This will test the functions of each channel.
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “
TEST
” is displayed, press ENTER.
3. The display will show “
T-01
”. You can now press the up
button and test the different channels.
