90
set restricted
Syntax:
set restricted <port range> <status>
Description:
Sets the restricted mode status for each port.
Arguments:
<port range>: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
<status> restricted mode status, either “enable” or “disable”
<enable|disable>: enable or disable
Example:
SS2GD8I(gvrp)# set restricted 1-8 enable
SS2GD8I(gvrp)# show config
GVRP state: Enable
Port Join Time Leave Time LeaveAll Time Applicant Registrar Restricted
---- --------- --------- -------------- --------- --------- ----------
1 20
60
1000
Normal Normal Enable
2 20
60
1000
Normal Normal Enable
3 20
60
1000
Normal Normal Enable
4 20
60
1000
Normal Normal Enable
5 20
60
1000
Normal Normal Enable
6 20
60
1000
Normal Normal Enable
7 20
60
1000
Normal Normal Enable
8 20
60
1000
Normal Normal Enable
set timer
Syntax:
set timer <port range> <join> <leave> <leaveall>
Description:
Sets GVRP join time, leave time, and leaveall time for each port.
Arguments:
<port range>: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
<join>: join timer, range from 20 to 100.
<leave>: leave timer, range from 60 to 300. Leave Time must equal to or greater than double the Join
Time.
<leaveall>: leaveall timer, range from 1000 to 5000.
Example:
SS2GD8I(gvrp)# set timer 2-8 25 80 2000
