52
3.16 Alarm Configuration
3.16.1 Events
The Trap Events Configuration page (Figure 3-52) allows the user to select which events will be sent to
the network administrator using which alert type. The switch supports 24 different trap events. The trap
information can be sent out in three ways, email, mobile phone SMS (short message system) and SNMP
traps. To enable a trap to be sent using a specific method, check the box beside the event and under the
desired notification method.
Figure 3-52: Trap Events Configuration Page
Trap types:
System traps:
Cold Start, Warm Start, Link Down, Link Up, Authentication Failure, User login, User
logout
STP:
STP Topology Changed, STP Disabled, STP Enabled
LACP:
LACP Disabled, LACP Enabled, LACP Member Added, LACP Port Failure
GVRP:
GVRP Disabled, GVRP Enabled
VLAN:
VLAN Disabled, Port-based VLAN Enabled, Tag-based VLAN Enabled, Metro-mode VLAN
Enabled, Double-tag VLAN Enabled
Module Swap:
Module Inserted, Module Removed, Dual Media Swapped
