24
Figure 3-13: Port Mirroring Page
Mode:
Used to “Enable” or “Disable” port mirroring. Default is Disable.
Monitoring Port:
Set the port that will be monitoring the other ports. Default is Port 1.
Monitored Port:
Set the port(s) to be monitored. Place an X beside the number of the port(s) to monitor.
The Monitoring port should not be selected as a Monitored port.
3.4 Bandwidth
Management
The Bandwidth Management page (Figure 3-14) allows you to set both incoming and outgoing bandwidth
limitations for each port.
Note:
Each port on the switch has its own 16KB packet buffer. The packet buffer size will
be reduced when the bandwidth rate limitation is enabled, which may cause jumbo
frames not to be forwarded. Jumbo frames should not be used in conjunction with
bandwidth limitations.
Figure 3-14: Bandwidth Management Page
