38
3.11.2 Maintenance
Page
The Maintenance page (Figure 3-34) allows the user to set the aging time for dynamic MAC address
entries, and flush all dynamic MAC address entries.
Figure 3-34: MAC Table Maintenance Page
Aging Time:
An idle MAC address that has exceeded the MAC address aging time will be removed from
the MAC address table. This setting has no effect on static MAC address. Range for Aging Time is from
10-65535 seconds. The default is 300 seconds.
Flush:
Remove all entries that are not static MAC entries from the MAC address table.
3.11.3 Static
Forward
The Static Forward page (Figure 3-35) allows the user to add or remove static MAC addresses from the
MAC address table. The static forward table associates a MAC address with a port and VID. When a
MAC address is assigned to a specific port, all of the traffic sent to this MAC address will be forwarded to
specified port.
To add a MAC address entry in the table, fill in the four parameters: MAC address, associated port, VID
and Alias, and click “Add”. To delete an entry, select the MAC address entry you wish to delete and click
“Delete”.
Figure 3-35: Static Forward Page
MAC:
A six-byte long Ethernet hardware address and expressed in hex and separated by hyphens.
Port No:
Port number of the switch between 1-8.
