•
I/O Address:
Standard VGA I/O: 3B0-3DF
•
Memory Addresses:
Video RAM: A000-BFFF, Video ROM: C000-C7FF
You cannot change the addresses of your ATI FireMV/ATI FirePro card. In case
of an address conflict, try to modify the I/O address of the add-on card that causes
the conflict.
To support the special graphics processor on the ATI FireMV/ATI FirePro card,
the system BIOS should automatically assign a system interrupt to the slot where
the card is installed. However, there may be problems if your graphics card does
not receive an interrupt or a system interrupt is used for more than one device.
In case of problems, check the system configuration utility of your operating
system for the interrupt assignments.
Workstation Customer Care
If you experience difficulties with your ATI FireMV/ATI FirePro product, you can
contact AMD Customer Care in the following ways.
Web
The AMD Customer Care Web site has number of helpful resources, including a
knowledgebase of FAQs and the ATI FireGL™/ATI FireMV™/ATI FirePro™ Web
Ticket Submission Page.
The Web site is complimentary and available at all times. The address is
Customer Care is available by e-mail at
. E-mails must
have "workstation-support" in the subject line. This service is complimentary for
registered users.
Web
41
©
2008
Advanced Micro Devices, Inc.
ATI FireMV 2400/ATI FirePro 2450
Summary of Contents for ATI FireMV 2400
Page 1: ...ATI FireMV 2400 ATI FirePro 2450 User Guide Part Number 137 50054 30...
Page 8: ...viii ATI FireMV 2400 ATI FirePro 2450 2008 Advanced Micro Devices Inc...
Page 18: ...10 Hardware Installation ATI FireMV 2400 ATI FirePro 2450 2008 Advanced Micro Devices Inc...
Page 38: ...30 Catalyst Control Panel ATI FireMV 2400 ATI FirePro 2450 2008 Advanced Micro Devices Inc...