Note:
If you do not plan to use hotkeys, select the
Disable hotkeys
check box so as
to not accidentally activate them.
Accessing the Color Hotkeys Settings Dialog
For the steps used to assign hot keys, refer to
26.
The easiest way to apply your own color settings from within a full screen 3D
application is to:
1.
Create a Full Screen 3D profile and save it.
2.
Assign hotkeys for the “Load Current Profile” action through the Color
Hotkeys Settings dialog.
3.
Make sure that the profile you prefer is selected from the drop-down list box,
and click
OK
.
4.
Once inside the 3D application, use the hotkeys to trigger the profile.
Some 3D applications allow you to switch easily between full-screen mode and
windowed mode and do not load their own color settings. In windowed mode,
you can make slider adjustments or select a different profile on the Color tab, then
switch back to full-screen mode to see the effects immediately.
1.
Select the
Full Screen 3D
radio button.
2.
Click the
Hotkeys
button to access the Color Hotkeys Settings dialog.
Assigning Color Hotkeys
When assigning hotkeys, be careful that the key combinations you choose do not
conflict with those of other applications in which you might want to use them.
The Color Hotkeys Settings dialog only checks for duplications within the Color
tab itself, insofar as it allows a hotkey combination to be assigned only once.
Note:
If you do not plan to use hotkeys, select the
Disable hotkeys
check
box so as to not accidentally activate them.
1.
In the Color Hotkeys Settings dialog, select a modifier key from the
Modifier
Key
list.
2.
Select a hotkey from the
Hotkey
list.
3.
Select the action you want from the
Hotkey Action
list.
4.
Click
Add
to create the hotkey combination.
Note:
Only one hotkey combination can be assigned to each action; if
you assign a new combination for an action, it will overwrite an
existing one.
This combination will appear in the
Assigned Hotkeys
text box.
Removing Color Hotkey Assignments
1.
In the Color Hotkeys Settings dialog, select a hotkey combination from the
Assigned Hotkey
text box.
26
Catalyst Control Panel
ATI FireMV 2400/ATI FirePro 2450
©
2008
Advanced Micro Devices, Inc.
Summary of Contents for ATI FireMV 2400
Page 1: ...ATI FireMV 2400 ATI FirePro 2450 User Guide Part Number 137 50054 30...
Page 8: ...viii ATI FireMV 2400 ATI FirePro 2450 2008 Advanced Micro Devices Inc...
Page 18: ...10 Hardware Installation ATI FireMV 2400 ATI FirePro 2450 2008 Advanced Micro Devices Inc...
Page 38: ...30 Catalyst Control Panel ATI FireMV 2400 ATI FirePro 2450 2008 Advanced Micro Devices Inc...