energy and, if not installed and used in accordance with manufacturer's
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Re-orient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to ensure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
Complies with FCC 15.107, 15.109, 15.111, and 15.117.
For further compliance information:
Advanced Micro Devices, Inc.
62 Forest Street
Marlborough, MA 01752
USA Tel: 508-303-3900
Industry Canada Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003 and with BETS-7,
Section 3.6.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du
Canada, et NTMR-7, Section 3.6.
CE Compliance Information
EMC Directive 2004/108/EC
CISPR 22:2006/EN 55022:2006—Class B: Limits and methods of measurement of
radio disturbance characteristics of Information Technology Equipment.
CISPR 24:1997/EN 55024:1998—Information Technology Equipment—Immunity
Characteristics—Limits and Methods of Measurements
Electrical Safety
Europe: The Low Voltage Directive—2006/95/EC
•
EN 60950-1—Safety of Information Technology Equipment
USA/Canada:
•
UL 60950-1 (Information Technology Equipment—Safety—Part 1: General
Requirements)
•
CSA C22.2 No. 60950-1 (Information Technology Equipment—Safety—Part 1:
General Requirements)
46
Reference
ATI FireMV 2400/ATI FirePro 2450
©
2008
Advanced Micro Devices, Inc.
Summary of Contents for ATI FireMV 2400
Page 1: ...ATI FireMV 2400 ATI FirePro 2450 User Guide Part Number 137 50054 30...
Page 8: ...viii ATI FireMV 2400 ATI FirePro 2450 2008 Advanced Micro Devices Inc...
Page 18: ...10 Hardware Installation ATI FireMV 2400 ATI FirePro 2450 2008 Advanced Micro Devices Inc...
Page 38: ...30 Catalyst Control Panel ATI FireMV 2400 ATI FirePro 2450 2008 Advanced Micro Devices Inc...