Ambit U10C034, User Manual

Page: 29 / 90

U10C034 MSO User’s Manual v1.4 June 2008
29
(1.3.6.1.4.1.4413.2.2.2.1.6.4.17.0 Integer32)
Setting this object to enabled(1) causes the eMTA to switch to GR303 mode.
The MTA will generate RTP on-hook event packets in the media stream until
off-hook is detected or the connection is deleted. Also MTA will treat
flash hook as separate on-hook and off-hook events, and send each event
triple redundantly, replacing voice packets in the RTPstream. Setting
this object to disabled(2) causes the eMTA not to use GR303 mode. This
object should only be changed by the configuration file.
‧
enabled(1)
‧
disabled(2)
emtaSignalingDefRtcpDSCP
(1.3.6.1.4.1.4413.2.2.2.1.6.4.23.0 Integer32)
This object contains the default value used in the IP header for setting
the DSCP for RTCP packets. When the value of this object is updated by
SNMP, the MTA MUST use the new value as a default starting from the new
connection. Existing connections are not affected by the value’s update.
2.2.2 Disabling the eMTA firewall
(1.3.6.1.4.1.4413.2.2.2.1.6.1.2.0 Integer32)
The eMTA stack has what is referred to as a lightweight firewall that
has a default value of enabled (true), but can be set to disabled (false)
when necessary
.
brcm-cm-mgmt-ext.mib
MIB Default Value Access
emtaFirewallEnable true read-write
2.2.3 MTA DHCP Option 122/177
mtaDhcpOption
(1.3.6.1.4.1.4413.2.2.2.1.6.1.5.0 OCTET STRING)
This object specifies the value of the PacketCable DHCP option
which will be used in MTA provisioning. Current PacketCable 1.x
Provisioning
Specification requires value 122, but certain legacy
systems still use the currently obsolete value of 177.
‧
cableLabsClientConfiguraton(122),
‧
packetCableAndCableHomeObsolete(177)